Do you have a question about the HobbyZone AeroScout S RTF and is the answer not in the manual?
Connect battery charge and balance leads to USB power source. Monitor LED for charging status.
Install four AA batteries into the transmitter for operation.
Attach landing gear, horizontal tail, and wing components to the aircraft body.
Consult local laws and choose an open area, avoiding people and structures.
Set the motor switch to 'DISARM' and then power on the transmitter.
Connect the flight battery to the aircraft, keeping hands away from the propeller.
Select 'Beginner Mode' (position 0) for initial flights, limiting pitch and roll.
Arm the motor, advance throttle slowly into wind, trim for straight/level flight.
Press button and release sticks to self-level aircraft from disorientation.
Reduce throttle, line up with runway, flare gently for touchdown.
Disconnect battery, power off transmitter, inspect aircraft, and store properly.