Need help?Do you have a question about the Hobie 15 and is the answer not in the manual?
Attaching the main halyard to the mast and rope.
Connecting shrouds, trapeze wires, and forestay to the mast tang.
Connecting the bridles to the stay adjuster using a small shackle.
Attaching the jib halyard block and securing the jib tack.
Installing the mast into the mastbase cup on the front crossbar.
Connecting the shock cord, trapeze lines, and J&H handle.
Identifying and assembling the right and left rudder components.
Using the adjustment screw to ensure rudder blades are parallel.
Attaching the tiller crossbar to the tiller arm.
Attaching the tiller extension stick to the tiller crossbar.
Attaching the jib halyard block and securing the jib tack and clew.
Setting up the jib sheet system in a closed circuit.
To Next Page
General
