Hobie 30115 User Manual

#30115 / Page 1 of 1
#30115 - “BABY BOB” MAST FLOAT.
Wave: Remove main halyard pulleys from mast head fitting. Slip mast float (blunt end
forward) over mast halyard fitting. Re-install pulleys, with screws and nuts from kit, thru float
fitting and halyard fitting.

Hobie 30115 Specifications

General

Part Number	30115
Category	Boating Equipment
Type	Kayak Cart
Compatibility	Hobie Kayaks
Brand	Hobie
Color	Silver
Wheel Type	Inflatable

Summary

Baby Bob Mast Float

Mast Float Installation Guide

Detailed procedure for installing the mast float, including hardware and pulley adjustments.