Need help?Do you have a question about the Hobie Mirage i12s and is the answer not in the manual?
General| Number of Paddlers | 1 |
|---|---|
| Length | 12 feet |
| Width | 36 inches |
| Weight | 68 pounds |
| Capacity | 400 pounds |
| Propulsion | MirageDrive |
Instructions on operating the three different chambers' valves for inflation and deflation, and securing valve covers.
Step-by-step guide to properly inflate the kayak, including checking valve positions and ensuring proper air pressure.
Procedure for deflating the kayak, including opening the forward hatch and releasing air from each chamber.
Advice on inflation methods, avoiding compressors, and managing pressure changes due to temperature for optimal use.
How to use the steering handle and disk on the left side to control rudder direction.
Using T-handles to raise or lower the rudder and secure it in the desired position with a cleat.
Step-by-step guide for assembling the pedal cranks onto the Hobie Mirage Drive unit.
Instructions on how to insert the Mirage Drive into the hull and secure it, and how to remove it.
Guide to adjusting pedals for optimal leg length and comfort, ensuring proper fit for efficient pedaling.
General safety warnings emphasizing the demanding nature of kayaking and the need for caution and adherence to rules.
Comprehensive pre-use safety checks covering personal readiness, equipment, and environmental awareness.
Step-by-step guide on how to right an overturned kayak and safely re-enter, maintaining a low center of gravity.
Instructions for adjusting pedals, proper pedaling technique, and preparing the drive for beaching or launching.
Guidance on proper seating, paddle grip, basic strokes, and using body mechanics for efficient paddling.
Methods for detecting air leaks, starting with valves and using soap spray to locate punctures.
To Next Page
