Need help?Do you have a question about the Hobie Mirage Tandem Island and is the answer not in the manual?
General| Length | 18' 6" / 5.64 m |
|---|---|
| Capacity | 600 lbs / 272 kg |
| Hull Construction | Rotomolded Polyethylene |
| Seating Capacity | 2 |
| Sail Area | 90 sq ft / 8.4 sq m |
| Weight | 240 lbs / 109 kg |
Explains key parts and terms of the Hobie Mirage Tandem Island, such as amas, akas, rudder, and sail.
Step-by-step guide for assembling the mast and attaching the sail, including furling.
Instructions for correctly installing the rudder onto the boat's stern.
Procedure for attaching the akas (outrigger arms) to the main hull.
Steps for connecting the amas (outrigger hulls) to the akas.
Detailed instructions on how to properly mount the mast into the hull.
Guide on how to connect the mainsheet to the sail grommet.
Details the various components and adjustment features of the Vantage CT seat.
Instructions for properly installing the Vantage CT seat into the kayak.
Covers front/rear height, recline, and lumbar support adjustments for the seat.
Guide on how to install and remove the MirageDrive unit from the kayak.
Instructions for adjusting the pedals for optimal rider comfort and efficiency.
How to use the MirageDrive for propulsion and in shallow water.
Instructions for deploying and retracting the rudder for steering.
Steps for lowering and raising the centerboard for stability.
How to extend or fold the amas for sailing or transport.
Procedures for unfurling and furling the sail.
Operation of the drain system to remove water from the seat well.
Guide on mounting the fishfinder transducer onto the hull.
Instructions for installing thru-hull plugs for cables.
Steps for running and routing electronic cables through the boat.
Best practices and things to avoid when storing the boat.
Advice on safely transporting the boat using trailers or roof racks.
Essential maintenance tips for boat trailers, including lights and wheels.
Proper methods for securing the rudder during transport.
Regular cleaning and lubrication for the MirageDrive system.
How to check and ensure proper tension on control cables.
Adjusting the rudder lines for optimal steering performance.
Steps to install a riser to adjust the height of the steering handle.
Essential checks and guidelines to ensure safe operation of the boat.
Recommendations for a test run to familiarize with the boat's features.
Techniques for safely entering the boat from the water.
Procedure for recovering the boat if it capsizes.
Procedures for launching the boat into the water and docking.
Steps for safely bringing the boat ashore on a beach.
Understanding sail trim for optimal performance and power.
Instructions on how to perform tacks and jibes.
How to reduce sail area for better performance in high winds.
Guide to changing the mainsheet system from 2:1 to 3:1 advantage.
To Next Page
