Need help?Do you have a question about the Hobie Mirage Lynx and is the answer not in the manual?
General| Length | 11' (3.35 m) |
|---|---|
| Width | 36" (0.91 m) |
| Capacity | 350 lbs (159 kg) |
| Drive | MirageDrive 180 |
| Crew | 1 |
| Weight | 57 lbs (25.9 kg) |
| Rudder System | Kick-Up Rudder |
Identifies and lists the main parts of the kayak, such as hull, drive, seat, and steering.
Overview of features labeled on the kayak, such as tracks, mounts, and accessory tubes.
Instructions for installing the pedal cranks into the MirageDrive drums.
How to attach the bow and stern carry handles to the kayak.
Details on how to securely install the kayak seat using connection points.
Instructions on adjusting the seat position for comfort and recline.
Steps for installing and removing the rudder using the track and gudgeon system.
How to install, position, and remove the steering handle on the kayak.
Instructions for connecting and operating the rudder control line.
Steps for installing and removing the MirageDrive 180 unit.
How to adjust the pedals for optimal comfort and ergonomic positioning.
Instructions on how to shift the MirageDrive into reverse and forward.
How to operate the MirageDrive in shallow water and when beaching.
Details on how the kick-up fins function and react to obstructions.
Instructions on how to properly rest and secure the paddle for storage.
Location of the spare rudder pin found in a pocket on the back of the seat.
How to install a transducer using the bottom hull plate and screws.
Guidance on where to place the cup holder accessory on the kayak.
How to install the PowerPole Mount using molded inserts and scupper covers.
Recommended methods for storing the boat, such as upside down or strapped.
Methods to avoid when storing the boat, like cockpit side up or on its side.
Important considerations for boat storage, including water removal and strap tension.
Advice on protecting the boat from weather elements like sun, snow, and rain.
Instructions for safely transporting the boat on a car roof rack.
Routine maintenance for the MirageDrive system, including rinsing and lubrication.
How to check and adjust the cable tension for optimal fin movement.
Steps for tuning the rudder system by adjusting steering cables and handle alignment.
How to adjust the kick-up set screw for the fins to ensure proper locking.
A list of essential safety precautions to follow before and during use.
Recommended pre-trip testing of the kayak and its features in calm conditions.
Instructions for safely re-entering the kayak after capsizing.
How to use the Mirage Cassette Plug for added safety when the drive is removed.
Importance of completing warranty registration for product information and support.
To Next Page
