Hobot S6 Pro - Page 4

- 2 -
 Ensure the UPS battery is fully charged. (Green light ON)
 Attach the cleaning clothes firmly to HOBOT to avoid air leakage.
 Fill the water tanks only with water or HOBOT window detergent. Other
detergents are not allowed.
Switching on and switching off
 Switch on the power before putting HOBOT onto the window.
 Make sure HOBOT is firmly attached to the window before letting go.
 Remove HOBOT from the window before switching off the power.
 Be aware that reflective glass and coated glass could be scratched by the
dust and dirt during cleaning.
 Always empty the water tank and dry the cleaning clothes before storing
HOBOT away.
 Do not touch the ultrasonic nozzles under any circumstances as they are
very fragile.
◎Battery & Power Adapter Safety Warnings
 Only plug the power adapter into a power outlet that matches the
specifications (100-240VAC).
 Do not attempt to repair the power adapter. Replace the entire unit if it is
damaged or exposed to high moisture. Contact a local HOBOT dealer for
help and maintenance.
 Ensure HOBOT and the power adapter are not trapped under heavy objects.
 Allow adequate ventilation around HOBOT and the power adapter. Do not
cover them with objects.
 Do not use HOBOT and the power adapter in strong magnetic fields, humid,
or high heat environments.
 HOBOT has a non-removable battery; contact an authorized service center
for assistance.
 Use the original power supply cords that come with HOBOT. Do not use
unauthorized chargers. Unauthorized chargers could cause damage,
malfunction, and danger.
 Do not open, crush, cut, puncture, short-circuit, or incinerate the battery. Do
not expose the battery to water, fire, or heat above 60°C (140°F).
 Store HOBOT in a dry and safe place if you won’t be using it for an extended
period. Charge the battery every 3 months to preserve battery life.
 Never operate HOBOT if the power supply cords are damaged. Ensure the
power cord is not stretched or exposed to sharp objects or edges.
 Do not use HOBOT if any part or accessory is damaged or defective.
 Always switch off the power and disconnect HOBOT from the power source
before cleaning or maintaining it.
 HOBOT is not waterproof. Damage may occur to the electronics if it is