Hodedah HI K78 User Manual

1
Hodedah
www.hodedah.com
support @hodedah.com
ASSEMBLY INSTRUCTION
HI K78 (MICROWAVE CART)
~ Before assembly, please read the instructions ~
~ Keep these instructions for future reference ~
~ Follow these steps to assemble the Microwave Cart ~
FRONT VIEW BACK VIEW
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT INFORMATION ABOUT ASSEMBLY AND
SAFETY. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Hodedah HI K78 Specifications

General

Brand	Hodedah
Model	HI K78
Category	Indoor Furnishing
Language	English

Summary

Parts Identification

Main Unit Components

Lists and details the various panels and components for the main unit structure.

Door and Drawer Components

Lists and details the panels and parts for the doors and drawers.

Hardware Components

Fasteners and Fittings

Details screws, dowels, caps, magnets, springs, and housings for assembly.

Specialty Hardware Items

Lists drawer slides, plate castors, allen keys, and hanging rods for assembly.

Recommended Tools

Safety and Support Information

Child Safety

Warning about small components and keeping them away from children.

Instruction Booklet Importance

Emphasizes reading and keeping the instruction booklet for safety information.

Customer Assistance

Provides instructions for obtaining replacement parts or assistance via email.

Assembly Guidance and Warranty

Pre-Assembly Instructions

Read steps carefully, check parts, work in spacious area, avoid power tools.

Handling and Moving Furniture

Tips for moving furniture safely with two people and avoiding dragging.

Product Warranty Details

Covers defects in material and workmanship for one year, limited to repair or replacement.

Pre-Assembly Preparation

Panel A & D Preparation

Attaching drawer slides, shelf supports, and inserting dowels into panels A and D.

Panel C, E, F, G, H Preparation

Inserting dowels into panels C, E, F, G, H and magnets into panel C.

Panel I Preparation

Inserting Minifix screws into the base of panel I.

Door Assembly - Step 1

Attach Door Hardware

Insert door support springs and attach handles to door panels J & K.

Install Magnet Plates

Secure magnet plates to the inner side of door panels J & K.

Drawer Assembly

Construct Drawer Box

Assemble drawer side, base, and back panels using screws and nails.

Attach Drawer Slides and Handle

Mount drawer slides to drawer sides and attach the handle to the drawer front.

Main Unit Assembly - Step 1

Assemble Main Frame Panels

Connect panels A, B, and C using dowels and screws with an Allen key.

Add Side Panel and Hanging Rod

Attach panel E to panel A and install a hanging rod onto panel E.

Main Unit Assembly - Step 2

Connect Front and Side Panels

Attach panels B and C to panel D using dowels and screws.

Install Shelving Supports and Rods

Connect panels G and F to H, adding hanging rods, using dowels and screws.

Main Unit Assembly - Step 3

Attach Assembled Frame to Base

Fix the assembled panels F, G, H onto panel D using dowels and screws.

Install Mobile Casters

Attach plate castors (with and without lock) to panel B using screws.

Main Unit Assembly - Step 4

Secure Unit Structure

Lift and secure panel I to A & D, insert and tighten Minifix housings.

Attach Back Panels

Nail the back panels O to the rear of the unit with specified spacing.

Main Unit Assembly - Step 5

Install Drawer and Shelves

Place adjusting panels Q and slide the assembled drawer into the unit.

Mount Doors

Insert door fittings into panels J & K and attach them to the unit frame.

Completion and Disposal