[37]
EN
CORDLESS STEAM IRON
• Set the steam output on button (F) according to the fabrics type to
be ironed, knowing that the symbol “ ” means “no steam” and the
symbol “ ” means “maximum steam”.
• The appliance is ready to be used. Each time you have to adjust the
piece of cloth, you must place the iron on the base (A) so that it
recharges and maintains the selected temperature.
• After use, turn o the appliance by sliding the steam control button (F)
to the o position “ ” and the temperature selector knob (K) to the
“MIN” position.
• Place the iron in the rest position on the base (A) and unplug it from
the power supply when nished ironing.
Temperature selection
• Select the temperature according with the international symbols for
fabric’s treatment or according with the fabric type:
SYMBOLOGY TYPE OF FABRIC
TEMPERATURE
SELECTOR KNOB
(J)
CAUTION – This symbol
marked on the fabric label
means that the fabric may
not be ironed.
Not applicable
Low temperature ( )
Synthetic, acrylic, rayon,
polyester.
MIN
(Minimum)
Medium temperature ( )
Wool, silk.
MED
(Medium)
High temperature ( )
Cotton, linen.
MAX
(Maximum)
• If the cloth material and the correct temperature to iron are unknown,
it is recommended to test ironing on a small part on the reverse side
of the cloth.
• Start ironing garments that require a lower temperature. This reduces
the waiting time (the iron needs less time to heat than to cool down)
To Next Page
Loading...