HOFFEN FGVTK-H014 - Temperature Selection for Steam Ironing; Ironing Without Steam; Water Spray

EN
[38]
CORDLESS STEAM IRON
and reduces the risk of garment damage.
• If it is being used a high temperature for ironing and it is necessary to
change to a lower temperature, place the temperature selector knob
(K) on a lower setting and wait a few moments.
Temperature selection for steam ironing
• In order to obtain a more ecient steam output, turn the temperature
selector knob (K) to the zone indicated with the symbol “ ” and “MAX”.
• Once the iron is ready for use, then set the steam output knob (F)
to the desired position, the symbol “ ” means “steam o” and the
symbol “ ” means “maximum steam”.
• At the end of use, set the steam output regulator (F) to the o position
“ ”.
Ironing without steam
• Make sure that the steam control button (F) is on o position “ ”.
• Select the desired temperature according with the fabrics type on the
temperature selector knob (K).
Water spray
• The water spray can be used whenever desired at any temperature, as
long as there is enough water in the water tank (C). It allows moistening
the fabrics, making easier to eliminate creases.
• Check that there is water in the water tank (C).
• Slowly press the button (D) to get a strong spray or quickly press the
button (D) for a mist spray.
• Reminder: in case of delicate fabrics it is recommended to pre-moisten
Note:
If the temperature selector knob (K) is not positioned at the area
indicated with the symbols “ ”, water may leak through soleplate
(B). This means that the appliance has not heated up suciently to
generate steam conveniently.
Note:
The rst time the appliance is used and when it is not used for a long
period of time, it may be needed to press several times the spray
button (G), until water is released.