[39]
EN
CORDLESS STEAM IRON
the fabric with water or, alternatively, placing a damp cloth between the
fabric and the iron.
Steam boost
• The steam boost provides an extra amount of steam to remove creases
or make folds, ironing lace, hanging clothes, curtains, among others.
• Turn the temperature selector knob (K) to the zone indicated with the
symbol “ ” and “MAX”, because only this position allows the perfect
steam boost output.
• Raise the iron a few centimetres above the clothing and press the
steam output button (I) to release the steam boost.
• To achieve an optimum result wait a few seconds between each time
the steam boost button (I) is pressed.
• To avoid water leak from the appliance’s soleplate (B), never press the
steam boost button (I) continuously and allow a small interval of time
before pressing it again.
Anti-drip system
• This appliance is equipped with an anti-drip system that stops the
production of steam when the selected temperature is too low, avoiding
water spots on clothing. This is not a malfunction.
Self-cleaning function
• The appliance will remain in best conditions if this function is performed
regularly, at least once every two weeks. Depending on the hardness
of the water used it may be necessary to perform this function more
regularly, especially when akes come out of the soleplate (B) during
ironing.
• Make sure the appliance is unplugged from the wall socket.
• Slide the steam output button (F) to the o position “ ” and ll the
water tank as previously described in “Filling up the water tank”, until
its maximum level “MAX”.
• Turn the temperature selector knob (K) to the “MAX” position, place
the appliance on the vertical resting position on the base (A) and plug
it to the wall socket.
Note:
To prevent stains, do not use the water spray in silk or synthetic fabrics.
To Next Page
Loading...