EN
[40]
CORDLESS STEAM IRON
• As soon as the appliance reaches the high temperature, unplugged the
it from the wall socket, hold it horizontally over a sink or a washbasin,
press the self-cleaning button (H) and gently shake the iron forwards
and backwards. The limestone and minerals will be eliminated through
the soleplate’s vents (B) with the expelled steam and water.
• Tilt the appliance forwards and backwards to completely empty the
water tank (C).
• Release the button (H) as soon as the self-cleaning function stops.
• After self-cleaning, plug the appliance to the wall socket to heat up and
let the soleplate (B) dry. After reaching the set temperature for ironing,
unplug the appliance from the wall socket and gently pass the base
(B) on a clean and soft cloth, in order to clean up any stains that have
arisen with the process of self-cleaning.
• Place the appliance on the vertical resting position on the base (A) and
allow it to cool down completely before storing it.
HINTS FOR A PERFECT IRONING
• Before ironing, read all the fabric labels and follow the manufacturer’s
instructions, presented through symbols, such as:
Do not iron Iron
Iron at a
maximum
temperature
of 110º
Iron at a
maximum
temperature
of 150º
Iron at a
maximum
temperature
of 200º
• Sort out the clothes to be ironed according with the fabric type. This
will minimize the frequency of temperature adjustment for the dierent
fabrics.
Note:
Note:
Do not use vinegar neither any other kind of descaling agent in
the deposit.
If any residues still come out through the steam vents of the
base (B), repeat the entire process of self-cleaning.
To Next Page
Loading...