3
24
Read the manual.
The product complies with the requirements of the applicable EU
directives.
Protection class II: Protection against electric shock is ensured by
adequate insulation (double or enhanced), the failure of which is
very unlikely.
WDC plug with negative pole on the shell outside.
Disposal of waste electrical and electronic equipment — see the
DISPOSAL section of this manual.
Instructions for the disposal of batteries — see the
DISPOSAL section.
Urządznie do użytku wewnątrz pomieszczeń.
Trademark indicating that the manufacturer has contributed
nancially to the construction and operation of a packaging
material recovery and recycling system.
Designation of the packaging material – corrugated cardboard.
Symbol on the power adapter indicating the product’s energy
eciency class.
Ingress protection rating of an electrical device. The marking
consists of the letters IP and two characters, the rst of which
denotes solid particle protection, and the second denotes liquid
ingress protection. 2 – protection against solid bodies with a
diameter of 2.5 mm or greater; 0 – no protection against penetration
by water.
4. EXPLANATION OF SYMBOLS
To Next Page
Loading...
