Need help?Do you have a question about the Hoffman geodyna 6300-2p P and is the answer not in the manual?
Details the procedure for unpacking the machine safely.
Lists and explains error codes that may appear during the machine's startup.
Explains how to fit the wheel adaptor onto the main shaft for proper clamping.
Explains how to manually enter the vehicle type using the display symbols.
Details how to manually select balancing modes for different wheel types and weight positions.
Details the determination and input of rim width.
Covers necessary preparation steps before balancing the wheel.
Explains how to perform wheel balancing using the Easy Alu function.
Explains how to select balancing mode for behind-spokes placement and input wheel data.
Covers errors related to operation, indicated by Error Code E.
Details fatal error codes (300XXX or C10XXX) related to internal checks.
Details the readjustment process using code C14.
General| Category | Wheel Balancers |
|---|---|
| Balancing Accuracy | 1 gram |
| Power Consumption | 0.5 kW |
| Wheel Diameter Range | 10 - 26 inches |
| Wheel Width Range | 1"-20" |
| Power Supply | 230V 50/60Hz |
To Next Page
