E 2005 Hoffman Enclosures Inc.
2 87565511
To avoid electric shock and equipment damage,
disconnect any power supplies to the enclosure
before installing the electric heater.
English
INTRODUCTION
1. Before installing the electric heater, read these instructions carefully. Failure
to follow these instructions could damage the product or cause a hazardous
condition.
2. Check the ratings on the heater label to assure the product is suitable for
your application.
WARNING
GENERAL SAFETY INFORMATION
1. Protect the lead wires from coming in contact with sharp objects, hot
surfaces, and/or chemicals.
2. If continuous operation of the heater is essential to the safe functioning of
any other equipment, adequate warning devices must be installed to assure
safe operation at all times.
These electric heaters are not designed for use in dusty,
dirty, corrosive, or hazardous locations.
Portions of the heater can get hot. Adequate protection
must be taken to protect people from potential burns, and to
protect other components from this heat.
This heater can only be installed in a totally enclosed metal
enclosure.
CAUTION
To Next Page
Loading...
Need help?
General
