7.Place the therapy tube in such a way that
there is no tension onto the mask when you
lay down.
8.Breathe deeply and calmly and only through
the nose. If the softstart-function is activated
the device will after leakage test automatically
reduce the therapeutic pressure first and then
gradually increase it until the value prescribed is
reached. This enables you to fall asleep while
the device is working with a reduced pressure.
NOTE:
Read in the section "Programming" how the time
for softstart and mask test can be adjusted to your
individual requirements.
15
Respiration Therapy Device TREND 300
Proper Use of the Device
To Next Page
Loading...
