Hogtunes NCA 450-RM User Manual (English)

Need help?

Do you have a question about the Hogtunes NCA 450-RM and is the answer not in the manual?

Hogtunes NCA 450-RM Specifications

General

Brand	Hogtunes
Model	NCA 450-RM
Category	Amplifier
Language	English

Summary

INSTALLATION INSTRUCTIONS

Remove Battery Connections

Disconnect positive and negative battery terminals before proceeding with installation.

Remove Fairing Assembly

Release Wire Harnesses

Detach Amplifier from Plate

Mount Amplifier Plate

Configure for Ultra Classic

Connect rear harness for stock Ultra Classic front and rear speaker setup.

Configure for Other Models

Connect rear accessory harness for speaker lids or fairing lower speakers.

Secure Amplifier to Plate

Connect Turn-On Lead

Connect Brake Side Speakers

Connect Clutch Side Speakers

ROUTING THE POWER AND LONG REAR SPEAKER HARNESS FOR ULTRA STOCK LOCATION SPEAKERS

Route Harnesses Under Fairing

Connect Rear Speaker Plugs

Connect Power and Ground

Attach amp's red wire to positive and black wire to negative battery terminals.

Test Speaker Functionality

Turn on stereo, test all speakers, and check fader control.

Secure Connections and Seat

Critical Safety Check: Steering Clearance

Turn front wheel to extremes to ensure wiring does not impede steering.

Related product manuals

Hogtunes NCA 450-RM User Manual

Table of Contents