Hogtunes REV 200-AA - User Manual




InstructionDisclaimer

Dennis Kirk provides instructions to help our customers better understand how to install the
products we sell. The instructions are exact copies of what the manufacturer includes with the
product being sold.
That means the quality and accuracy of the instructions is solely dependent on what the
manufacturer produces. We do our best to make the text legible and the pictures viewable.
However, the end result depends largely on the quality of instructions the manufacturer
provides.
Therefore, you will find that some instructions are not of the highest quality. Sometimes text is
hard to read and pictures are not easy to see. At times you will find the overall look of the
instructions to be less than professional. However, we feel it is better to provide what we have
rather than provide nothing at all.
To the best of our knowledge the instructions and application information contained in the
instructions is accurate. However, Dennis Kirk assumes no liability related to any errors that
may be contained in the copy of the manufacturer’s instructions we provide. Buyers are solely
responsible to insure that product use is consistent with their application.
If you have any questions please contact us at customerservice@denniskirk.com
or
800-969-7501 so we can further assist you regarding additional product information or any other
business related questions.
Thank you for doing business with Dennis Kirk.

Summary

Instruction Disclaimer

Mounting Considerations and Adaptor Kits

Mounting on Standard, EG Classic, Street Glide, Ultra (Single Amp)

Mounting the amp to the top of the radio using supplied adhesive. No adaptor needed.

Mounting on Standard, EG Classic, Street Glide, Ultra (Second Amp)

Requires Hogtunes '2CHSP' kit for mounting between radio and speaker.

Mounting on Road Glide or Road Glide Ultra (Single Amp)

Uses Hogtunes RG Adaptor Kit (4405-0096) to bolt amp to inner fairing studs.

Mounting on Road Glide or Road Glide Ultra (Second Amp)

Uses Hogtunes RG 40.4 Adaptor kit (4405-0232) for second amp mounting.

Getting Started

Mounting the Amp (Standard, EG Classic, Street Glide, Ultra)

Instructions for mounting the amp to the factory radio using adhesive for specific bike models.

Mounting the Amp (Road Glide or Road Glide Ultra)

Instructions for mounting the amp to a plate for Road Glide models.

Wiring the Amplifier

Single Amp Wiring

Wiring connections for when the REV 200-AA is the only amp in the system.

Second Amp Wiring (with NCA 450-AA or 40.4)

Connecting the second amp to a Hogtunes NCA 450-AA or NCA 40.4.

Second Amp Wiring (with REV 200-AA or NCA 70.2)

Connecting a second REV 200-AA or NCA 70.2 amplifier.

Amplified Output and Remote Turn On

Connecting speaker outputs and the remote turn-on lead.

Routing the Power Harness

Guide for routing the power harness through different bike models.

System Upgrades

System Upgrade #1: Adding Rear Speakers

Adding rear speakers using the amplifier's expansion port.

System Upgrade #2: Dual Amplifiers

Using two REV 200-AA amplifiers for increased power.

System Upgrade #3: 4-Channel Configuration

Configuring a 4-channel system using Hogtunes components.

Adjusting Your System

Automatic Volume Control and Settings

Recommended settings for Automatic Volume Control (AVC) and general adjustments.

Performance in Different Environments

Understanding how system performance varies with speed and environment.

Aftermarket Car Radios and Features

Tips for using aftermarket car radios and disabling distracting features.

Technical Specifications

Practice Safe Sound!

Hogtunes REV 200-AA Specifications

General

Channels	2
Frequency Response	20Hz - 20kHz
Type	Class D
Signal to Noise Ratio	>80dB
THD	<1%
Fuse Rating	25A
Power Output	200 Watts