11
Power indicator and Bluetooth indicator function
Power Indicator Lights
Stay on: Fully charged or charging complete
Single flashing: Charging
Continuous Flashing: Calibrating
Bluetooth Indicator Light
1.1. Blinks red and green alternatively:
To be activated (at first use)
1.2. Blinks yellow and green alternatively:
The remote control is pairing (The remote control is an optional accessory)
2. Color indicates the status of gimbal
Green: Bluetooth is connected
Yellow: Bluetooth is not connected
Red: Warning of abnormal loads on the stabilizer or failed firmware upgrade
3. Blinking indicators of working modes
Solid Light: Pan & Tilt Follow
Flash twice: Pan Follow
Flash triple: All Lock
Flash four times: POV (All Follow)
Pulse: Standby mode
To Next Page
Loading...
