Need help?Do you have a question about the Hohem iSteady MT2 and is the answer not in the manual?
General| Category | Camera Accessories |
|---|---|
| Type | 3-Axis Gimbal Stabilizer |
| Charging Time | 3 hours |
| Pan Angle | 360° |
| Roll Angle | 320° |
| Tilt Angle | 320° |
| Controllable Range Pan | 360° |
| Controllable Range Tilt | 320° |
| Controllable Range Roll | 320° |
| Wireless | Bluetooth 5.1 |
| App Name | Hohem Joy |
| Stabilization | 3-Axis |
| Control | Joystick, App |
| Compatibility | Smartphones, Action Cameras |
| Mounting | 1/4" screw |
| Material | Aluminum Alloy |
Steps to mount a camera, including unlocking axes and using the quick release plate.
Mount camera to plate, attach plate to L-bracket, and tighten screws securely.
Install the camera with L-Bracket onto the gimbal mount and lock the mount latch.
Steps to mount a phone in landscape or portrait mode using the quick release plate and L-bracket.
Steps to mount an action camera in landscape or portrait mode using the quick release plate and L-bracket.
Detailed steps for balancing the tilt, roll, and pan axes of the gimbal.
Switch modes, auto calibration, remote pairing, clear remote, and access settings.
Activate sport mode, recenter, reverse rotation, and all lock functionality.
Half-press for focus, press once to record, hold to take photo, press twice to switch modes.
Switch focus/roll, control focus, or switch CCT/RGB for fill light.
Mount the fill light with AI vision sensor onto the magnetic joint, 'hohem' mark upward.
Switch the sensor to 'ON'. Indicator light turns red with fill light flashing twice.
Use 'OK' gesture to start tracking (green light), 'PALM' to stop (red light).
Place gimbal on flat surface, double press trigger, press M button five times to calibrate.
Follow on-screen instructions in the Hohem Joy App for firmware updates.
To Next Page
