Hohem iSteady MT2 - Using the Hohem Joy App: Bluetooth Connection; Bluetooth Connection Steps

20
9.Motor angle 󽘀ne-tune:
The current 󽘀ne-tune value of angle for each motor
10. Pairing/unpairing with
GoPro camera:
Signal strength icon 󽘁ashing represents the gimbal is
pairing with GoPro, signal strength icon stop 󽘁ashing
and a " ✓ " showing represents successful pairing.
(Note: If no camera is paired with gimbal within 60
seconds, signal strength icon stops 󽘁ashing and
icon shows, which represents failed pairing;
Clear the paired camera," ✓ "
represents successful unpairing.
09 How to Use the Hohem Joy App
Bluetooth Connection
1. Power on iSteady MT2.
2. Turn on Bluetooth on Mobile Phone.
3. Launch the App Hohem Joy and follow the prompts to connect iSteady MT2 device.
*If the stabilizer's Bluetooth cannot be found or if it is being occupied by another
phone, you can try clearing the stabilizer's Bluetooth information to reconnect it.
Long-pressing the M button for 󽘀ve seconds while simultaneously pushing up on the
Zoom lever. The Bluetooth symbol on the display implies that the paired device
has been cleared.
Long-pressing
the M button
Pushing up on
the Zoom lever
*Press and hold both of
buttons for 5 seconds.