Hohem iSTEADY V2 - Working Mode & Follow Speed; Working Modes Explained; Follow Speed Settings

9
Working Mode & Follow Speed
For changing working mode or follow speed, please open Hohem Pro app - Start
Recording – Gimbal Parameter Settings
Ensure the Bluetooth is connected and change the settings
Working Mode
Pan&Tilt Follow
This is the default working mode. When you rotate the handle left/right/tilt up/tilt down,
the camera will follow the handle movements, and the roll motor is locked without
following the movement.
Pan Follow
When you rotate the handle left/right, the camera will follow the handle movements.
The tilt motor does not follow within the angle range of -30°~+30 movement, if exceed
this range, the gimbal will follow the tilt movement, and the roll motor is locked without
following the movement.
All Lock
The roll and pan motors are locked without following the movement. The tilt motor does
not follow within the angle range of -30°~+30 movement, if exceed this range, the
gimbal will follow the tilt movement.
POV (All Follow)
First person point of view
Gives you 360° complete movement, you can pan, tilt and roll with it.
Follow Speed
General
Shooting with general follow speed
Slow
Shooting with slow follow speed
Medium
Shooting to follow the fast movement
Fast
Fast follow speed for video transition