Hohner Clavinet D6 - Step Two: Right Panel Disassembly; Remove Right Panel Thumbscrew; Detach Right Panel and Damper Mechanism

Clavinet D6 Disassembly Guide
http://www.oldschool-sound.com
Page2/2
Clavinet D6 Disassembly Guide Page Two
Step Two
On the right wood panel, remove the
thumbscrew located in the upper right hand
corner.
Pull up the enlongated piece of metal and
pull the wood panel straight out towards
you. You will notice a small red wheel
attached to the panel that rolls underneath
the metal. This is the damper mechanism.
Remove the panel from the keyboard.