HOLDEN WN Caprice 2017 User Manual

Holden WN Caprice Owner Manual (Holden-Localising-Holden-11038818) -
2017 - crc - 10/12/16
40 Seats and Restraints
Lumbar
Adjust the lumbar support by sliding
the switch.
Memory Seats
The vehicle has driver's seat and
outside mirror position memory.
{
Warning
Before moving the seat, ensure
the path both in front of and
behind the seat is clear of
obstructions.
The SET, 1, 2, and S (Exit) buttons
on the driver's door are used to
manually save and recall memory
settings for the driver's seat and
outside mirror positions.
Storing Memory Positions
To store positions to memory for the
1 and 2 driving positions:
1. Place the ignition in ON/RUN
or ACC/ACCESSORY.
2. Adjust the driver's seat and
outside mirrors to the desired
driving positions.
3. Press and release SET. A beep
will sound.
4. Immediately press and hold 1
until two beeps sound.
5. Repeat Steps 1–4 for a second
driver using button 2.
To store exit positions for when you
get out of the vehicle, repeat
Steps 1–4 using
S (Exit) to store
your positions.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
S (Exit) to
manually recall the stored memory
positions. Releasing 1, 2, or
S (Exit)
before the stored positions are
reached stops the recall.
Automatically Recalling Memory
Positions
If available and enabled in the
Vehicle Personalisation menu, the
Auto Memory Recall feature
automatically recalls the current
driver's previously stored 1 or 2
position when the ignition is
changed from off to ON/RUN or
ACC/ACCESSORY.
See Vehicle Personalisation 0 90.

HOLDEN WN Caprice 2017 Specifications

General

Brand	HOLDEN
Model	WN Caprice 2017
Category	Automobile
Language	English