Holley 0-7448 - User Manual

CARBURETOR
P/N 0-7448, 0-4412C, & 0-4412S
INSTALLATION, TUNING, AND
ADJUSTMENT MANUAL
199R7950-7
NOTE: These instructions must be read and fully understood before
beginning installation. If this manual is not fully understood,
installation should not be attempted. Failure to follow these
instructions, including the pictures may result in subsequent
system failure.

Summary

INTRODUCTION

REMOVAL

INSTALLATION NOTES

CHRYSLER APPLICATIONS

Notes for Chrysler vehicles, including transmission compatibility and throttle lever extension.

FORD APPLICATIONS

Notes for Ford vehicles, detailing transmission linkage setup and required parts.

GM APPLICATIONS

INSTALLATION

FORD APPLICATIONS WITH AUTOMATIC TRANSMISSIONS

Specific adjustment procedure for kickdown linkage on Ford automatic transmissions.

CHOKE ADJUSTMENT

IDLE MIXTURE NEEDLES

FLOAT LEVEL CHECK AND ADJUSTMENT

JETTING (MAIN JETS)

POWER VALVES

CARBURETOR SPECIFICATIONS

Holley 0-7448 Specifications

General

Brand	Holley
Model	0-7448
Category	Automobile Parts
Language	English