NORM/GAUG SURF >> DG03 & TMT Battery/Pressure Status (to access and scroll through, press S 2 sec)
NORM/GAUG SURF >> SET F >> SET A >> SET U >> SET T
• to access & step through, press both A & S (2 sec).
SET F (FO2/PO2 Alarms) >> GAS >> GAS 2 >> GAS 3 >> FO2 DEFAULT
• to step through, press A (< 2 sec).
SET A >> AUD >> DEPTH >> EDT >> NIBG* >> DTR >> TURN >> END
• to step through, press A (< 2 sec).
SET U >> WET >> UNITS >> DS* (RUN TIMER**) >> SS* >> CF* >> GLOW >> SAMPLING >> TMT1, 2, 3
• to step through, press A (< 2 sec).
SET T >> 12/24 >> HOUR >> MINUTE >> YEAR >> MONTH >> DAY
• to step through, press A (< 2 sec).
SURF ALT
to
NORM
to
MAIN
NORM SURF MAIN
GAUG SURF MAIN FREE SURF MAIN
OPERATING MODES
• There are 3 Modes of operation - NORM (Air or Nitrox), GAUG (no Ni-O2), and FREE (no Ni-O2 or Pressure)
• Dive Mode - if Wet Activation is set Off, you must Activate the DG03 prior to the rst dive of a series
• SmartGlo Backlight - press S.
• NORM/GAUG display Times as hr:min, FREE displays Times as min:sec (NDC as hr:min), and Time of Day is always hr:min.
NORM PLAN
TIME to FLY
DESAT TIME
LOG PREVIEW
HISTORY MODE
to ALT
FREE SURF >> ALT1 (Temp/Time) >> ALT2 (Last EDT, Max Depth)
• to access & step through, press A (< 2 sec).
FREE SURF >> CDT Status >> SET MINUTES >> SET SECONDS
• to access, press A (2 sec); to set press both A & S (2 sec).
FREE SURF >> EDT Alarm > DEPTH Alarm 1 >> DEPTH Alarm 2 >> DEPTH Alarm 3
• to access, press both A & S (2 sec); to step through, press A (< 2 sec).
min:sec
• To Select the Operating Mode to be used, press/release M while the Mode graphic (NORM, GAUG, or FREE) is ashing.
Read and Understand
the Operating Manual
DG03
Reference
M (2 sec)
* NORM only.
** GAUG only.
to
SAT
FULL LCD
S
M
A
A
(< 2 sec)
A
(< 2 sec)
A
(< 2 sec)
A
(< 2 sec)
A
(< 2 sec)
A
(< 2 sec)
A (< 2 sec)
M (2 sec)
M (2 sec)
To Next Page
Need help?
General
