Need help?Do you have a question about the Hollis LTS Series and is the answer not in the manual?
General| Type | Dive Computer |
|---|---|
| Display | LCD |
| Nitrox | Yes |
| Modes | Air, Nitrox, Gauge |
| User Replaceable Battery | Yes |
| Battery Type | CR2450 |
| Depth Rating | 100m (330ft) |
| Operating Temperature | -5°C to 40°C |
Compliance with EU regulations and specific standards for equipment.
Instructions for warranty registration, including online options.
Explanation of warning symbols and their meanings in the manual.
Critical warnings about intended use, temperature limits, and inspection.
Guidelines for safe operation, including not inhaling gas and seeking instruction.
Information on who can use the equipment and potential hazards.
Lift capacity, weight options, and tank size for LTS models.
Detailed specifications for ENVIRO-PRO and HD-200 BCD models.
Lift capacity and tank size for the REDS model.
Importance of proper care and annual servicing by an authorized dealer.
Essential checks before each dive to ensure equipment functionality.
Procedures for rinsing, cleaning, and storing the BCD after diving.
Steps to adjust the cummerbund for a custom fit.
How to adjust or remove the sternum strap for diver preference.
Instructions on how to properly weave the waist buckle.
Steps for attaching and adjusting the crotch strap.
How to attach a single tank to the backplate using the cam band.
Detailed instructions for weaving the cam band for secure tank attachment.
How to inflate the BCD using manual and power inflation methods.
Methods for deflating the BCD using the inflator or dump valve.
Steps to connect the low-pressure inflator hose to the regulator.
Using inflation/deflation for buoyancy control during dives.
How to load weight pouches into the integrated system.
Procedures and warnings for dropping weight pouches.
How to load weight pouches into the Style 2 integrated system.
Procedures and warnings for dropping weight pouches from Style 2.
Guidelines for ensuring a comfortable and secure fit of the BCD.
Benefits of using Hollis sidemount systems for various diving types.
Labeled diagram of the SMS75 harness and its components.
Labeled diagram of the SMS100 harness and its components.
Labeled diagram of the SMS Katana harness and its components.
Identification of components for rigging scuba cylinders.
Components included in the Sidemount Cylinder Harness Kit.
Final adjustments for harness fit, wing streamlining, and trim.
Specifications for different Hollis BCD wing models.
Operation of manual and power inflation for the BCD.
Procedures for deflating the BCD using inflator or dump valve.
Connecting the low-pressure inflator hose to the BCD.
Techniques for maintaining neutral buoyancy during a dive.
Components and assembly of the Solo Harness system.
Steps for weaving the main harness webbing through the backplate.
How to install shoulder pads and D-rings for comfort and accessory attachment.
Instructions for threading and adjusting waist straps and D-rings.
Steps for adjusting the crotch strap for proper fit.
Instructions for weaving the waist buckle for secure fastening.
Visual guide to the parts of the Elite 2 Harness system.
Instructions for assembling the waist strap on the Elite 2 harness.
Steps for weaving and attaching the upper shoulder straps.
Detailed steps for attaching and weaving shoulder straps, including sternum strap.
Procedures for adjusting the crotch strap on the Elite 2 harness.
Instructions for weaving the waist buckle for the Elite 2 harness.
Steps to assemble the backplate onto the BCD wing.
Basic post-dive care instructions for the assembled unit.
To Next Page
