Holman WS5052B - Programming - Daily Alarm Setup

9
Programming - Manual Time Setup - Cont.
Programming - Daily Alarm Setup
• The display for the month is ashing. Use “+“ and “-“ to select the month. Press “MODE “ to conrm.
• The display for the date is ashing. Use “+“ and “-“ to select the date. Press “MODE “ to conrm.
• The language selection for the display of the weekdays is ashing. Use “+“ and “-“ to select the
language. Press “MODE “ to conrm.
Information:
• The clock automatically changes from set-up mode to time display mode if no keys are pressed
for 20 seconds.
• Press “MODE” to switch from time display to A1 display.
• Press and hold the key “MODE” for 3 seconds, the ashing alarm time is shown.
• The hour display of the alarm time will ash. Use “+“ or “-“ to select hour. Press “MODE “ to conrm.
• Then follow with the minutes. Use “+“ or “-“ to select the minutes. Press “MODE “ to conrm.
• Then press “MODE” to switch from A1 display to A2 display. (The setting is the same as for A1)
• A1 is for Monday to Friday and A2 is for Saturday and Sunday.
Daily alarm on/off
• When showing A1 alarm time, press “-“ to activate the alarm 1 with alarm symbol showing.
• Press “MODE” again to cancel the alarm.
• When showing A2 alarm time, press “-“ to activate the alarm 2 with alarm symbol showing.
• Press “MODE” again cancel the alarm .
Information:
• The clock automatically changes from set-up mode to time mode if no keys are pressed for 20 seconds .
• Press any key to turn off alarm when beeping. (The alarm sounds for 2 minutes if no key is pressed to stop it)
WS5052B Weather Alarm Clock.indd 11 24/07/13 8:22 PM