EN
V-STRUT 916.001.337_001 23
• Dry the equipment.
• Coil the tension belt. Refer to Fig. 16.
5.5.2 Store
• Rub a light layer of WD-40 preservative oil on the steel parts.
• Store the equipment in a dry and well-ventilated area.
6 Maintenance
6.1 General
Proper preventive maintenance of the equipment preserves the operational safety and extends the life
of the equipment.
6.2 Dangerous substances
6.3 Maintenance materials
/i
Contact the Holmatro dealer for information on spare parts.
6.4 Yearly maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools.
The Holmatro dealer can organize the yearly maintenance for you on a contract basis. In this way you
are assured of correct and safe operation.
6.5 Long term storage
• For long-term storage, apply preservative to the external steel parts.
• Store the equipment in a dry, well-ventilated area.
NOTICE
Do not store the equipment before the tension belt is dry.
Damp material can be detrimental to the belt material and the metal.
CAUTION
When performing maintenance activities, always comply with the relevant safety regulations.
Wear the prescribed personal protection equipment.
CAUTION
Used or leaked fluids, and any other products consumed during the activities,
must be collected and disposed of in a environmentally responsible way.
Application Type of maintenance material Amount
Hinge pins Teflon lubricating oil As required
Steel parts WD-40 preservative oil As required
Tectyl ML from Valvoline (long term preservation) As required
To Next Page
Loading...