HOLOSUN HS 403B - Motion Power Off and Sleep Time Delay; Parallax-Free Optical System; Brightness Adjustment

31
5. Moon power o: Please note that your sight will au-
tomacally enter into sleep mode aer 8 hours (fac-
tory seng) of no movement. The sleep me delay
could be overwrien and adjusted from 0 to 12 hours.
Sleep me delay:
– Press the "+" buon for 3 seconds to enter me ad-
justment mode. The green dot will blink. The num-
ber of blinks represents the chosen step. One blink
for example represents 1 hour of me delay.
– Press the "+" or "-" buon to set the me. Pressing
"+" or "-" one or more mes will increase or decrea-
se the me by one step for each press. The LED will
blink once to conrm each me a buon is pressed.
If the sleep me delay is set on "0", the features ist
disabled.
– Then press the "+" buon for 3 seconds to conrm
the new seng and exit the me adjustment mode.
6. Opcal system – parallax free: Parallax < 1MOA
7. Brightness adjustment: There are 12 sengs for the
intensity of the red dot in order to match the ambient
light condions.