36
ZERO SETTING
First of all zero the weapon in combination with your
red dot sight. On top of the sight is the elevation ad-
justment screw, the windage adjustment screw is on
the right side (see Fig. 6 and 7) Please use the protec-
tive cap for adjustment.
1. Position the slot type cap on the slotted screw,
then rotate the screw to right or left for adjust-
ment. Each left or right click is for one adjustment,
equivalent to 0.5MOA value.
2. Rotating the elevation screw clockwise will lower
the red dot, rotating counter-clockwise will move
the red dot up. Similarly for the windage adjust-
ment, rotating clockwise will move the red dot to
the left, rotating counter-clockwise will move it to
the right.
To Next Page
Loading...
