HOLSEM A5 - Troubleshooting and Disposal; Troubleshooting Guide; Correct Product Disposal

8
Troubleshooting:
Problem
Possible Cause
Solution
Does not work
Power cord has not been
inserted into the power socket
Closely insert the power cord into the
grounded power socket.
Did not set the cooking model
Press the model selection button to
select appreciate cooking model,
then press the ON/OFF button
(PUSH button).
Didn’t press the ON/OFF button
(PUSH button) after select
cooking model.
Click the ON/OFF button (PUSH
button).
Food is rare
when time up
Too much food in the basket
Fry food in several batches
Temperature set is too low
Set to an appropriate temperature,
re-fry food.
Cooking time is short
Set an appropriate cooking time, re-
fry food.
Did not fry
food evenly
Certain foods need to be shaken
in the middle of cooking.
In the middle of cooking process, pull
the pan out and shake it to separate
the overlapping food material, then
push the pan back to continue.
Fried food is
not crispy
Some food materials have to be
fried with oil
Brush a thin layer of oil on the
surface of the food first, then start to
fry.
Can not
smoothly push
the pan back
to the
appliance
The basket has too much food
or materials are too heavy
The food material in the basket can
not exceed the max line.
The basket is not correctly
placed in the pan.
Press the basket into the pan.
Handle bar got stuck..
Place the handle bar in horizontal
position.
Smoking
Frying oily food
Normal phenomenon.
Fryer pan contains oil from last
use
Please clean the pot and basket after
each use.
Correct Disposal of this product:
This marking indicates that this appliance should not be disposed
with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources