HOLSEM A5 - Operating the Air Fryer; Before First Use; Preparing for Use; Using the Appliance

5
Before the first use
1. Remove all packaging material.
2. Remove the stickers and labels from the appliance
3. Thoroughly clean the basket and the pan with hot water, some washing
liquid and a non-abrasive sponge.
4. Wipe the inside and outside of the appliance with a moist cloth.
Preparing for use
1. Place the appliance on a stable and flat surface.
Note: Do not place the appliance on non-heat-resistant surface. The
appliance works with good air circulation so keep it away from hot surface,
and any combustible materials.
2. Place the basket in the pan properly - you will hear click sound. Slide the
pan back to the appliance.
Note: This appliance works with hot air. Don not fill the pan with oil or
frying fat.
Do not put anything on top of the appliance. This disrupts the airflow
and affects the hot air frying result.
Using the appliance
1. Plug in the mains plug.
2. Preheating: Press the PUSH button. Then press the Timer button .
Rotate the knob to left to set the preheating time to 3 minutes. Press the
PUSH button again to start the preheating.
3. When the timer counts down to 0, carefully pull the fry pot out of the
appliance, place the ingredients inside the fry basket (Attention: do not
exceed the maximum line); well connect the fry basket with fry pot, and then
slide the pan back to the appliance.
Note: Never use the pan without the basket in it.
Note: Do not touch the pan while cooking and some time after cooking, as the
pan gets very hot. Only hold the pan by the handle.