Do you have a question about the Holy Stone X Series and is the answer not in the manual?
Brand | Holy Stone |
---|---|
Model | X Series |
Category | Quadcopters |
Language | English |
Explains quad-rotor design, Headless Mode, One Key Return, assembly, and 6-Axis Gyro system.
Lists all included components such as the quad-copter, remote control, manual, blades, and screws.
Covers age restrictions, operational safety, battery handling, and keeping away from children.
Details the microcomputer control system, 2.4Ghz technology, and flight functions of the transmitter.
Covers 3D Flips, One Key Return, Left/Right Throttle, and Trimmer A/B functions.
Details Power Switch, Indicator, Throttle Limit, Throttle Change, and Mode Selection buttons.
Guide to configuring the remote for Left Hand or Right Hand throttle control.
Details the four available control stick modes and their functions.
Details the three available flight modes: Beginner, Intermediate, and Advance.
Labels and identifies the main parts of the quad-copter.
Instructions for attaching the protection frames and landing gear to the quad-copter.
Procedure for safely replacing the quad-copter's battery.
Instructions for charging the quad-copter battery using the USB charger.
Steps required before initiating flight, including battery check, signal connection, and takeoff.
Using Trimmer A or D to correct forward/backward yaw.
Using Trimmer B or C to correct leftward/rightward yaw and turning.
Explains upward, downward, turn left, turn right, forward, and backward movements.
Details how to perform leftward and rightward flight maneuvers.
Instructions for performing 3D flips and manual rolls.
Procedure for activating and deactivating the Headless Mode feature.
Steps to recalibrate the gyro for correct flight direction in Headless Mode.
Explains how to control the quad-copter's direction in Headless Mode.
Guidance for pilot's body orientation when flying in Headless Mode.
How to use the One Key Return feature and exit it.
Important tips for flying in Headless Mode and One Key Return.
Illustrates the proper connection of motors to the PCB.
Step-by-step guide for replacing the quad-copter's foot stands.
Instructions for attaching the mobile phone holder to the remote control.
Steps to install the FPV camera and connect its wiring.
Guide to downloading and installing the 'HOLY STONE' app for real-time transmission.
Lists common problems, their reasons, and solutions for the quad-copter.
Company mission, commitment to quality, and customer contact information.