What to do if my HOLZMANN MASCHINEN HBS 400 Saw stops or will not start?
If your HOLZMANN MASCHINEN Saw won't start, first, allow the motor to cool down, then reset it by pushing the off switch. After that, check all power connections and replace the fuse or reset the circuit breaker. If the issue persists, try changing the cable.
Why does my HOLZMANN MASCHINEN Saw make unsatisfactory cuts?
If your HOLZMANN MASCHINEN Saw makes unsatisfactory cuts, you can try the following: replace the band, ensure the teeth point downwards, remove and clean the band, change the band to the correct type, and clean the table.
Why does the band wander during cut on my HOLZMANN MASCHINEN Saw?
If the band wanders during a cut on your HOLZMANN MASCHINEN Saw, check and adjust the fence. If the issue persists, try selecting another piece of wood or reducing the feed rate. You might also need to change the band to the correct type.
How to fix excessive vibration in my HOLZMANN MASCHINEN HBS 400 Saw?
If your HOLZMANN MASCHINEN Saw vibrates excessively, try repositioning it on a flat, level surface. If the vibration continues, replace the v-belt or the pulley. You should also check and adjust the motor, and ensure all hardware is tightened.
What to do if the band on my HOLZMANN MASCHINEN Saw does not come up to speed?
If the band on your HOLZMANN MASCHINEN Saw does not come up to speed, replace the cord with an adequate size cord. If this does not resolve the issue, contact your local electric company.
What to do if HOLZMANN MASCHINEN HBS 400 Saw band runs in opposite direction?
If the saw band runs in the opposite direction on your HOLZMANN MASCHINEN Saw, shut off the machine immediately and have an electrician correct the connection to the supply circuit.
General| Brand | HOLZMANN MASCHINEN |
|---|---|
| Model | HBS 400 |
| Category | Saw |
| Language | English |
Defines the machine's purpose and proper usage guidelines.
Specifies environmental limits for machine operation.
Lists actions and conditions that are forbidden during operation.
Provides crucial safety rules and warnings for safe operation.
Outlines potential hazards that remain even with safety measures.
Details the items included in the machine's delivery package.
Covers essential steps before starting the assembly process.
Specifies necessary conditions for the machine's installation location.
Instructions for cleaning machine parts before assembly.
Guides on reassembling components detached for transport.
Details the procedure for safely connecting the machine to power.
Instructions for physically attaching and positioning parts of the machine.
How to set the distance for the lower bandsaw blade guide.
How to set the distance for the upper bandsaw blade guide.
Steps for installing the machine's work table.
How to attach and align the guide rail for the rip fence.
Procedure for setting the work table to the correct angle.
Instructions for attaching the emergency stop switch cover.
General guidelines for operating the machine safely and effectively.
Overview of the machine's operational functions.
How to safely start and stop the bandsaw machine.
Adjustments required for optimal machine performance.
Steps to adjust the angle of the work table.
How to align the bandsaw blade with the guide rollers.
Procedure for setting the correct tension for the bandsaw blade.
How to set the cutting height for different workpieces.
How to position and adjust the miter fence for angled cuts.
Core instructions for performing cutting operations with the machine.
How to connect and use an extraction system for dust.
Daily maintenance tasks to be performed after each use.
Step-by-step guide for replacing the bandsaw blade.
Procedure for replacing the V-belt drive component.
Instructions for cleaning the machine after use.
Guidance on how to properly dispose of the machine at its end of life.
Common causes and solutions when the machine fails to start.
Troubleshooting steps for when the saw band drifts off course.
Reasons for poor cut quality and how to fix them.
How to correct the bandsaw blade running in the wrong direction.
How to order replacement parts for the machine.
Visual diagram showing the assembly of machine components.
A numbered list of all available spare parts with descriptions.
Information on services available after the warranty period expires.
Details of services provided under the guarantee and after expiry.
Fields for the user to provide personal and contact information.
Fields for machine serial number and type.
Section to list part numbers and descriptions of needed spare parts.
Area to detail the issue encountered with the machine.
Important instructions regarding form submission and required documentation.
To Next Page
