Homasy HM589A User Manual

TROUBLESHOOTING GUIDE
1. If the information listed in the troubleshooting guide can't solve your problem,
please email us for help.
2. Failure to keep this unit clean from mineral deposits may affect operation of
this unit.
3. Customer failure to follow these instructions may void the warranty.
1. Valve
2. Sealing Ring
3. Water Floater
LED Indicator is off
LED indicator
stays red
Power adapter not plugged
in
No power from power outlet
No water in the water
reservoir
Water floater stuck
Power adapter not connect
to the input port
Ensure the power adapter is
properly plugged in
Try another power outlet
Connect power adapter to the
input port
Ensure there is enough water in
the water tank.
Ensure the ㎡ Valve is secured
properly to the tank bottom
allowing water to pass through
to the base.
Adjust the ㎡ water floater to
a horizontal position and make
sure it can rise up with water
Problem Possible Cause Solution
1
2
3
3
3
1
13

Homasy HM589A Specifications

General

Brand	Homasy
Model	HM589A
Category	Humidifier
Language	English