Notes & Warnings
1. This product should not be used by persons weighting more than 45kgs.
2. The legs of the trampoline are installed tightly , please make sure not to
pinch your fingers or hand during assembly.
3. The elastic springs can be stiff in the early stages of usage of the trampoline
and will loosen with time. Please be careful while install the trampoline and
do not hurt your body .
4. Must use elevated trampoline on wall to wall carpet or a floor than is not
slippery so unit does not slide when used.
Assembly Instructions
1. Lay all the trampoline part on the floor, connect 6 piece trampoline frame.
2. Install the “L” leg tube into the main rack in turn and tighten the screws by
tool.
3. With the trampoline frame now open and take out the jump mat in the
middle of the frame ,now start to install the elastic springs, Install two
4
To Next Page
Loading...
Need help?
General
