To Next PageTo Next PageWhat to do if my HOMCOM 823-052V70 Air Conditioner does not work?
If your HOMCOM Air Conditioner doesn't work, first, make sure it's properly plugged into the power outlet. If the display panel shows 'FL', turn the appliance off, drain it, and then turn it back on. Also, remember that the appliance can only restart three minutes after being turned off, especially if the timer 'OFF' function was used.
What to do if the compressor on my HOMCOM 823-052V70 doesn't work?
If your HOMCOM Air Conditioner's compressor isn't working, it might be due to activated delay protection. In this case, wait for three minutes, and then try turning it on again once the temperature decreases.
Why does my HOMCOM 823-052V70 start too frequently?
If your HOMCOM Air Conditioner starts too frequently, there might be a few reasons. Direct sunlight exposure can cause this, so try drawing the curtains. Open doors and windows, or heat sources in the room, can also be culprits; close doors and windows and remove any heat sources. A dirty filter screen or blocked air inlet/outlet could also be the problem, so clean or replace the filter and clear any blockages.
General| Brand | HOMCOM |
|---|---|
| Model | 823-052V70 |
| Category | Air Conditioner |
| Language | English |
Safety guidelines for placement, clearance, and avoiding flammable materials.
Instructions on checking the power plug and the correct sequence for using the appliance.
Identifies and lists the primary physical components of the air conditioning unit.
Details the functions and layout of the appliance's control panel and remote.
Guidelines for positioning the appliance on a stable surface with adequate clearance.
Instructions for correctly attaching and positioning the exhaust duct for operation.
How to operate the appliance in cooling mode, including temperature and fan speed adjustments.
Instructions for using the appliance solely for fan circulation, without cooling.
Guidance on operating the appliance for moisture removal, including drainage setup.
How to set automatic ON/OFF timers for the appliance's operation.
Explains the automatic water vaporization system and how to drain excess water.
Covers cleaning, filter screen maintenance, and seasonal storage of the appliance.
Lists error codes and their corresponding multi-functional defects for the appliance.
Provides specifications for the appliance's fuse, including size, voltage, and current.
Offers solutions for common problems encountered with the appliance's operation.
Information on environmentally responsible disposal of the appliance as per EC directive.
Steps to take before operating the appliance to prevent damage and ensure proper function.
Crucial warnings regarding power supply, refrigerant handling, and general usage safety.
Guidelines for working with R290 refrigerant, including area checks and ignition sources.
