Need help?Do you have a question about the HOMCOM 835-471 and is the answer not in the manual?
Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten.
Ensure correct starting position for cam lock before inserting connecting quickfit.
Turn cam lock clockwise to tighten.
Loosen hinge, adjust door panel position (up and down), then fasten screws.
Loose middle screw of hinge, adjust panel in/out, then fasten screws.
Adjust nut at centre of hinge to fine tune tilting angle for vertical panel.
Attach components using screws S and T to secure the top panel.
Attach hardware P, Q, and R as shown for final assembly.
Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten.
Ensure correct starting position for cam lock before inserting connecting quickfit.
Turn cam lock clockwise to tighten.
Loosen hinge, adjust door panel position (up and down), then fasten screws.
Loose middle screw of hinge, adjust panel in/out, then fasten screws.
Adjust nut at centre of hinge to fine tune tilting angle for vertical panel.
Attach components using screws S and T to secure the top panel.
Attach hardware P, Q, and R as shown for final assembly.
General| Product Name | HOMCOM 835-471 |
|---|---|
| Category | Indoor Furnishing |
| Type | Recliner Chair |
| Color | Black |
| Assembly Required | Yes |
| Material | Steel |
| Weight Capacity | 120kg |
To Next Page
