What to do if my Home Decorators Collection Indoor Furnishing has no power?
If your Home Decorators Collection Indoor Furnishing unit has no power, ensure the power cord is securely plugged into a standard 120V outlet and that the unit is powered on.
Why doesn't the remote control for my Home Decorators Collection 2291FM-23-259 work?
If the remote control for your Home Decorators Collection Indoor Furnishing isn’t working, the battery may be weak or failing. Replace it with 1 CR-2025 battery.
What does error E1 mean on my Home Decorators Collection 2291FM-23-259 Indoor Furnishing?
Error E1 on your Home Decorators Collection Indoor Furnishing indicates that the overheat sensor has been engaged. Unplug the unit and wait 15-20 minutes for the sensor to reset. Then, plug it back in and turn on the heater. If the problem persists, call customer service. Note that other functions besides the heater should work normally.
What does error E2 mean on my Home Decorators Collection 2291FM-23-259?
Error E2 on your Home Decorators Collection Indoor Furnishing means the thermostat sensor is broken or not working correctly. Unplug the unit, wait 15-20 minutes for the sensor to reset, then plug it back in and turn on the heater. If the issue continues, contact customer service. Note that the other functions should still work, excluding the heater.
How to fix no flame effect on Home Decorators Collection 2291FM-23-259?
If there is no flame effect on your Home Decorators Collection Indoor Furnishing, but the unit is powered on, the flame effect may be powered off. Push the flame brightness button until the desired level is achieved.
Why does the power cord of my Home Decorators Collection 2291FM-23-259 Indoor Furnishing get warm?
It is normal for the power cord of a heater appliance to get warm to the touch during operation because it requires more current to operate. Check the connections of the appliance cord and the outlet, ensuring the plug fits tightly. During use, frequently check the plug and outlet; if they are HOT, discontinue use and consult a qualified technician to check or change the overheating outlet(s).
Why aren't the heater and blower working on my Home Decorators Collection 2291FM-23-259 Indoor Furnishing?
If the heater and blower on your Home Decorators Collection Indoor Furnishing aren't working, but the other functions are, make sure the heater is set to "HI" (High) to ensure it runs continually.
Why does the fan motor keep running after I turn off my Home Decorators Collection 2291FM-23-259 Indoor Furnishing?
The fan motor continuing to blow after the Home Decorators Collection Indoor Furnishing unit is powered off is a standard feature. The blower runs for an additional time to cool off the heater tubes.
Essential safety guidelines and warnings for product use and installation.
Manufacturer's warranty terms, conditions, and limitations for the fireplace.
Steps and information needed before starting the assembly process.
Step-by-step instructions for assembling the fireplace unit.
How to use the control panel and remote for the fireplace functions.
Procedures for cleaning, upkeep, and battery replacement.
Solutions for error codes and operational problems.
List of replacement parts and their corresponding part numbers.
General| Product Name | Home Decorators Collection 2291FM-23-259 |
|---|---|
| Category | Indoor Furnishing |
| Model Number | 2291FM-23-259 |
| Fixture Color/Finish | Brushed Nickel |
| Fixture Material | Metal |
| Glass/Shade Color | Frosted |
| Light Bulb Base Code | E26 |
| Power Source | Hardwired |
| Maximum Bulb Wattage | 60 Watts |
To Next Page
