EasyManua.ls Logo

Home Decorators Collection 23MMP90586-PD01 - User Manual

Home Decorators Collection 23MMP90586-PD01
31 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
KERRINGTON ELECTRIC FIREPLACE MEDIA MANTEL
USE AND CARE GUIDE
We appreciate the trust and confidence you have placed in Home Decorators through the purchase of this electric fireplace. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators!
THANK YOU
QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE,
CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE
MONDAY - FRIDAY 8 A.M. - 7 P.M. EST, AND SATURDAY 9 A.M. - 6 P.M. EST.
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
1006152685/316091776/23MMP90586-PD01
1006152681/316091778/23MMP90586-PG76
1006152683/316091777/23MMP90586-TPO98
1006335689/316091776/23MMP90586-PD01H

Table of Contents

Questions and Answers

  • C
    Carl SpencerAug 16, 2025
    Why does my Home Decorators Collection 23MMP90586-PD01 remote control not working?
    • J
      jessewernerAug 17, 2025
      If your Home Decorators Collection Indoor Furnishing remote control isn't working, there are a few potential causes. First, check the batteries and replace them if needed. Second, the signal might be poor. Try operating the remote transmitter at a slow, measured pace, pressing the buttons with an even motion and gentle pressure. Avoid repeatedly pressing buttons in rapid succession, as this can cause the transmitter to malfunction. Finally, ensure you are within 20 feet of the appliance and pointing the remote at the control panel.
  • A
    Alison RobinsonAug 20, 2025
    What to do if Home Decorators Collection Indoor Furnishing flame effect works but heater function does not and the emberbed flashes when the Heater button is pressed?
    • R
      Renee MendozaAug 20, 2025
      If the flame effect on your Home Decorators Collection Indoor Furnishing works, but the heater function doesn't, and the ember bed flashes when you press the Heater button, it's likely that the heater is disabled. To re-enable it, press and hold the Power button on the control panel for 10 seconds while the power is on. Once re-enabled, the ember bed lights will flash multiple times.
  • C
    Charles SuarezAug 25, 2025
    How to fix Home Decorators Collection 23MMP90586-PD01 that stopped heating before reached desired temperature?
    • F
      fleeAug 25, 2025
      If your Home Decorators Collection Indoor Furnishing stops heating before reaching the desired temperature, it may have reached its set temperature. To resolve this, set the fireplace to a higher temperature or to the “always on” setting.
  • B
    Bradley ShahAug 28, 2025
    What does it mean when my Home Decorators Collection Indoor Furnishing display Shows “E5”?
    • R
      Ronald CombsAug 28, 2025
      If your Home Decorators Collection Indoor Furnishing display shows “E5”, it indicates that the heater air outlet is blocked. Make sure there is a 3-foot clear space in front of the heater air outlet.
  • R
    Robert EvansSep 1, 2025
    Why my Home Decorators Collection Indoor Furnishing heater does not blow warm air?
    • T
      Tyler DiazSep 1, 2025
      If your Home Decorators Collection Indoor Furnishing heater is not blowing warm air, it might be in a cool down cycle. During this normal operation, the unit will continue to run for less than one minute before shutting down, and cool air will blow. The exact time may vary based on temperatures.
  • T
    Teresa JacksonSep 4, 2025
    What to do if there is no power and the logs do not glow on my Home Decorators Collection 23MMP90586-PD01 Indoor Furnishing?
    • A
      Andrew BryantSep 5, 2025
      If there is no power and the logs do not glow on your Home Decorators Collection Indoor Furnishing, ensure the unit is plugged into a standard 120V outlet. Also, press the Power button several times and make sure power is set to the “ON” position.
  • B
    Benjamin RichardsSep 8, 2025
    What to do if the logs glow, but there is no flame effect on my Home Decorators Collection 23MMP90586-PD01?
    • K
      Kelly FloydSep 8, 2025
      If the logs glow, but there is no flame effect on your Home Decorators Collection Indoor Furnishing, the flame board may be broken. Contact customer service for a replacement flame board.
  • C
    christopherbeckerNov 12, 2025
    What to do if my Home Decorators Collection 23MMP90586-PD01 Indoor Furnishing display shows " "?
    • L
      Leslie HensleyNov 12, 2025
      If your Home Decorators Collection Indoor Furnishing display shows a blank, there could be several reasons. First, the thermostat sensor might be broken or disconnected. Try unplugging the fireplace, removing the back panel, and ensuring the thermostat is properly plugged into the main circuit board. If that doesn't work, contact customer service for a replacement thermostat sensor, as it may be short-circuited. Another possibility is that the Manual Reset overheat protection has been triggered. Inspect the heater to ensure that air inlets and outlets are not blocked. Unplug the heater for 30 minutes to allow it to cool down, then replug and monitor. If the issue continues, stop using the heater and contact customer service. Finally, the power cord overheating protection may have activated...

Home Decorators Collection 23MMP90586-PD01 Specifications

General IconGeneral
BrandHome Decorators Collection
Model23MMP90586-PD01
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals