The Smart Auto CCT Triple Head Security Flood Light (ES00931G) is a versatile outdoor lighting solution designed to enhance home security with its bright illumination and smart features. This device is intended for permanent installation and offers adjustable lighting, motion detection, and smart app control.
Function Description:
The primary function of this device is to provide security lighting for outdoor areas. It features three adjustable lamp heads that can be positioned to cover a wide area. The integrated motion sensor detects movement, triggering the floodlight to illuminate the surroundings. A key feature is its Smart Auto CCT (Correlated Color Temperature) capability, which allows for automatic adjustment of the light's color temperature based on ambient conditions, or manual adjustment via the accompanying smartphone app. The device can operate in various modes, including light OFF, sensor mode, and an always-ON mode with Auto CCT. It is designed to be integrated with the Home Zone Smart APP, enabling remote control, scheduling, and customization of its settings.
Important Technical Specifications:
- Illumination Output: Approximately 3500 lumens, providing bright light for security purposes.
- CCT (Correlated Color Temperature): Adjustable from 3000K to 5000K, offering a range from warm white to cool white light.
- Wattage: 36W, indicating its power consumption.
- Power Source: AC120V/60Hz, suitable for standard household electrical systems.
- Detection Range: Up to 70 feet (21.3m) with a 240-degree detection angle, ensuring broad coverage for motion sensing.
- Wi-Fi Frequency: Supports 2.4GHz Wi-Fi networks only, not compatible with 5GHz. This is crucial for smart app connectivity.
- Installation Height: For best performance, the light fixture should be installed at 5.9 feet to 11.5 feet (1.8m to 3.5m) above the ground.
Usage Features:
- Adjustable Lamp Heads: The three lamp heads can be swung left, right, up, and down to direct light precisely where needed, optimizing coverage and minimizing light spill.
- Adjustable Motion Sensor: The motion sensor can also be gently grasped and adjusted left, right, up, or down to fine-tune its detection area.
- Smart App Control (Home Zone Smart APP):
- Remote ON/OFF: Turn the light on or off from anywhere.
- Auto CCT ON/OFF: Enable or disable automatic color temperature adjustment.
- Manual CCT Adjustment: Manually select the desired color temperature.
- Brightness Adjustment: Manually adjust the light's intensity.
- Motion Detection Range Setting: Customize the sensitivity and range of the motion sensor.
- Full Light Duration Setting: Set how long the light stays on after motion is detected.
- Luminance Detection: Configure ambient brightness levels to activate the sensor.
- Slight Bright: Set a low brightness level and duration for continuous, subtle illumination.
- Scheduling: Create schedules for the light to turn on/off or change modes at specific times.
- Intelligent Linkable: Connect and control multiple Home Zone Smart devices within the app.
- Reset Function: The smart light can be reset by long-pressing the ON/OFF button for approximately 5 seconds.
- Installation Flexibility: Can be installed on covered walls or eaves, with specific instructions for mounting plate orientation ("arrow" upward for wall, "arrow" toward the house for eave).
Maintenance Features:
- Cleaning: Periodically clean the fixture with a soft cloth.
- Avoid Harsh Cleaners: Do not use any cleaners with chemicals, solvents, or harsh abrasives (e.g., scouring pads, powders, steel wool, abrasive paper) on this light, as they can cause deterioration of the finish.
Important Safety and Installation Notes:
- Always turn off electrical power at the fuse or circuit breaker box before wiring.
- All electrical and grounded connections must comply with the National Electrical Code and local code requirements, and all wiring connections should be UL standard compliant.
- Wear gloves and safety glasses during installation and maintenance.
- Avoid direct eye exposure to the light source when it is on.
- Allow the fixture to cool before touching to prevent burns.
- Do not exceed the maximum wattage marked on the luminaire label.
- Installation should be performed by an experienced household wire installer or a qualified electrician.
- Use silicone caulk to seal the gap between the mounting bracket and the wall for weatherproofing.
- The product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (www.P65Warnings.ca.gov).
- This device complies with Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts received interference.
- Maintain a minimum distance of 20 cm between the radiator and your body during operation.
To Next Page
Need help?
General
