11
OPERATING PROCEDURES & MAINTENANCE
Fry mode
• Press the fry button (4) to start frying, you will see the Fry light up on the screen. The default
power level is level 10. Press “+”, “-“ or slide to enter into the power mode.
Boil mode
• To activate Boil Mode press the Boil button (5), you will see the Boil light up on the screen.
The default power level is level 10, and working time is 30 minutes. Press “+”, “-“ or slide
again to enter into the power mode.
Note: Keep the liquid level between 30% and 80% of the pot capacity for safe use.
Boost mode
• The Boost button (6) boosts the cooktop to work under the highest power level. Press again
to return to the original power setting. Press “+”, “-“ or slide to enter into the power mode.
Child lock mode
• To lock the Control panel during cooking, press Child lock button (10). The indicator “Lock”
will appear on the screen. In this mode, only the Power on/Standby button (7) can be used
to switch off the appliance. To unlock the Control panel, press and hold the Child lock button
for 3 seconds.
Switching off the appliance
• After use, the indicator “H” ashes on the screen, meaning the cooktop is hot. To switch off
the appliance, press the Power on/Standby button (7) and unplug from the power supply.
Note: This unit has 10 separate heating levels, please refer to the following table for the wattage
of each level.
Level 1 2 3 4 5 6 7 8 9 10
Watt-
age
120 300 400 600 800 900 1000 1100 1300 1500
To Next Page
Loading...