7
SPECIFICATIONS
• Input Voltage: AC100~240V
• Frequency: 50~60Hz
• Output Voltage: DC12V
• Rated Power: 4W
• Coverage Area: 40 sq.ft. (3.75 sq. meters)
• Appliance Size: 6.7 in x 6.7 in x 8 in (170mm X 170mm X 205mm)
• Appliance Weight: 2.4 lbs (1.1 kg)
OPERATING PROCEDURES & MAINTENANCE
1. Connect the power supply
Insert the output end of supplied adapter into the connector on the bottom of the
appliance (see Figure 1). Make sure the lter and the bottom cap are fully assembled, then
put the appliance on a at surface.
Plug the adapter into a power outlet.
WARNING: To ensure safe operation of the appliance, always use the supplied adapter to
avoid any accident or injury. If the supplied adapter is damaged or lost, please contact
hOme
®
customer service at 1-800-898-3002.
2. Turn on/off and seings
Once the appliance is plugged in, the LED indicator light around the power button will turn
red indicating you are in “standby” mode.
Press the “power button” to turn the appliance to low speed (the indicator LED
surrounding the power button will turn light blue in color).
Press the “power button” again to turn the appliance to high speed (the indicator LED
surrounding the power button will turn dark blue in color).
Press the power button again to turn the appliance off.
WARNING: If the appliance is not being used, please turn off the appliance and unplug it
from the power outlet to avoid damage.
3. Ion function
The ion generator inside the appliance provides millions of ions and turns on automatically
when the appliance is on. The ion generator turns off when the appliance is on “standby”
mode or turned off.
4. Change Filter Indicator
The “change lter” indicator light will ash each time the lter needs to be cleaned or
replaced.
To Next Page
Loading...
