Home HME030286N - Page 24

24
Operation
Load cutlery and dishes
Before loading the dishes, you should remove large left-over and soften remnants of burnt food in pans.
When Loading the dishes and cutlery, please note:
• Dishes and cutlery must not impede the rotation of the spray arms.
• Load hollow items such as cups, glasses and pans etc. with the opening downwards so that water
can not collect in the container or a deep base.
• Dishes and items of cutlery must not lie inside one another, or cover each other.
• Load large items which are most difcult to clean into the lower basket.
• The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and
tea cups.
Aention!
• Long bladed knives stored in an upright position are a potential hazard!
• Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the
upper basket.
Damage to glassware and other dishes
Possible causes:
• Water temperature and duration of dishwasher program.
Suggested solutions:
• Use glassware or porcelain dishes that have been marked dishwasher-safe by the manufacturer.
• Use a mild detergent that is described as kind of dishes. If necessary, seek further information from
detergent manufacturers.
• Select a program with a low temperature.
• To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the
program has ended.
At the end of the wash
• When the working cycle has nished, the buzzer of dishwasher will ring for 6 times. Press Power
button to turn off the appliance.
• Shut off the water supply and open the door of the dishwasher.
• Wait a few minutes before unloading the dishwasher, so as to avoid handling the dishes and utensils
while they are still hot and more susceptible to breakage. They will also dry better.
Removing the dishes
To prevent water dripping from the upper basket into the lower basket, we recommend that you empty
the lower basket rst and then the upper basket.