16
Operating Instructions
USING YOUR AIR CONDITIONER
Electronic Control Panel & Remote Control
NOTE:
This display always shows the room temperature in Fan Mode except when setting the Timer.
1
2
3
456789
Normal Operating Sounds
• You may hear some noise caused by water hitting the condenser, on rainy days, or when the humidity
is high. This design feature helps remove moisture and improve efciency.
• You may hear the thermostat click when the compressor cycles on and off.
• Water will collect in the base pan during rainy days or days of high humidity. Water may overow and
drip from the outside part of the unit.
• The fan may run even when the compressor is not on.
1. Digital Display: When the timer is not in use, the operation mode and the set temperature will be
displayed. Time will be displayed under the timer setting.
2. and Use these buttons on the control panel and remote to increase or decrease the
Set Temperature or Timer. Temperature range: 61°F~88°F or 16°C ~31°C.
3. Turn the air conditioner on or off.