8
CLEANING
Always unplug the fan before cleaning.
Use a soft damp cloth with a mild soap to clean fan.
DO NOT use abrasive cleaners.
DO NOT immerse fan in water and never allow water to
drop into the motor component.
DO NOT use petrol, thinner or other chemicals to clean
the fan.
1.
2.
3.
4.
5.
STORAGE
–
Store the device and any accessories in a dry,
well-ventilated place.
–
In case of longer periods without operation, protect the
device and its accessories against soiling and corrosion.
OPERATION
1. Switch the unit on via the timer knob and turn the speed
knob to select between the 3 speed options:
1 = Low, 2 = Medium and 3 = High
2. To stop the fan, turn dial to '0'
3. To oscillate the fan, turn dial anti-clockwise to select
between the 3 oscillating modes:
1 = Low, 2 = Medium and 3 = High
4. To preset the timer for operation, rotate the dial to select
desired length of time. You can select between 0-120
minutes, in timer mode.
To Next Page
Loading...
