EasyManuals Logo

Homelite HPW2201 User Manual

Homelite HPW2201
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
3
ENGLISH
ALWAYS REFUEL OUTDOORS. Never refuel
indoors or in a poorly ventilated area.
NEVER STORE THE MACHINE WITH FUEL IN
THE FUEL TANK INSIDE A BUILDING where
ignition sources are present, such as hot water and
space heaters, clothes dryers, and the like.
IF THE FUEL TANK HAS TO BE DRAINED, DO
THIS OUTDOORS.
TO REDUCE THE RISK OF FIRE AND BURN
INJURY, handle fuel with care. It is highly flammable.
DO NOT SMOKE WHILE HANDLING FUEL.
ADD FUEL BEFORE STARTING THE ENGINE.
Never remove the cap of the fuel tank or add fuel
while the engine is running or when the engine is
hot.
LOOSEN FUEL CAP SLOWLY to release pressure
and to keep fuel from escaping around the cap.
REPLACE ALL FUEL TANK AND CONTAINER
CAPS SECURELY.
WIPE SPILED FUEL FROM THE UNIT. Move 9m
away from refueling site before starting engine.
 IF FUEL IS SPILED, do not attempt to start the
engine but move the machine away from the area
of spillage and avoid creating any source of ignition
until fuel vapours have dissipated.
NEVER ATTEMPT TO BURN OFF SPILLED FUEL
UNDER ANY CIRCUMSTANCES.
BEFORE STORING, ALLOW THE ENGINE TO
COOL.
STORE FUEL IN A COOL, WELL-VENTILATED
AREA, safely away from spark and/or flame-
producing equipment.
STORE FUEL IN CONTAINERS specifically
designed for this purpose.
EMPTY FUEL TANK AND RESTRAIN THE UNIT
FROM MOVING before transporting in a vehicle.
WHEN SERVICING USE ONLY IDENTICAL
HOMELITE REPLACEMENT PARTS.
Use of any other parts may create a hazard or cause
product damage.
USE COLD WATER ONLY.
MAKE SURE MINIMUM CLEARANCE of 1m is
maintained from combustible materials.
SAVE THESE INSTRUCTIONS. Refer to them
frequently and use them to instruct other users.
If you loan someone this tool, loan them these
instructions also.
The safety valve opens when the permissible operating
pressure is exceeded; water ows back to the suction side
of the pump. The safety valve is set by the manufacturer
and sealed. Contact customer service when you want your
safety valve set.
The thermo-valve opens when the permissible water
temperature is exceeded and prevents the pump from
overheating.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Homelite HPW2201 and is the answer not in the manual?

Homelite HPW2201 Specifications

General IconGeneral
BrandHomelite
ModelHPW2201
CategoryPressure Washer
LanguageEnglish

Related product manuals