Homelite UT13120 User Manual

Page 16
REPLACING WHEELS
See Figure 16.
To replace a wheel:
 Disconnect the mower from the power supply.
� Turn the mower on its side.
 Using a flat blade screwdriver, pry off the hubcap.
 Remove the cotter pin from the wheel axle, then remove
the wheel.
 Replace with new wheel and insert new cotter pin to
secure.
 Replace hubcap.
STORING THE MOWER
See Figure 17.
 Disconnect the mower from the power supply.
 Turn mower on its side and clean grass clippings that have
accumulated on the underside of the mower deck.
 Wipe the mower clean with a dry cloth.
� Check all nuts, bolts, knobs, screws, fasteners, etc., for
tightness.
� Inspect moving parts for damage, breakage, and wear.
Have repairs made on any damaged or missing parts.
 Store mower indoors in a clean, dry place out of the reach
of children.
 Do not store near corrosive materials such as fertilizer or
rock salt.
To lower the handle before storing:
 Fully loosen the handle knobs on the sides of the handle
and fold the upper handle down.
 Push inward on each side of the lower handle, and lift the
sides of the lower handle past the edges of the handle
mounting brackets.
 Fold the lower handle forward, making sure not to bend
or kink the power cord.
Fig. 16
MAINTENANCE
Fig. 17
LOWER
HANDLE
HANDLE
MOUNTING
BRACKET
HUBCAP
COTTER PIN
WHEEL
WHEEL AXLE
HANDLE KNOBS
UPPER
HANDLE

Homelite UT13120 Specifications

General

Brand	Homelite
Model	UT13120
Category	Lawn Mower
Language	English