What to do if my HomeMatic HmIP-BWTH24 Thermostat has a communication error?
If you're experiencing a communication error with your HomeMatic Thermostat, verify the connection to the Homematic IP Access Point or floor heating actuator.
What to do if HomeMatic HmIP-BWTH24 Thermostat duty cycle exceeded?
If the duty cycle is exceeded on your HomeMatic Thermostat, the device should start working correctly again after a short period, typically within an hour.
Why HomeMatic HmIP-BWTH24 displays command not confirmed?
A 'command not confirmed' error with your HomeMatic Thermostat may occur because the receiver cannot be reached, is unable to execute the command (due to load failure or mechanical blockade), or is defective.
General| Type | Thermostat |
|---|---|
| Device Type | HmIP-BWTH24 |
| Product Type | Heating Thermostat |
| Brand | HomeMatic |
| Model | HmIP-BWTH24 |
| Frequency | 868 MHz |
| Power Supply | Battery |
| Operating Voltage | 3 V |
| Display | LCD |
| Mounting | Wall-mounted |
| Protection class | IP20 |
| Compatibility | HomeMatic IP |
| Communication Protocol | Homematic IP |
| Humidity Range | 0% to 95% relative humidity, non-condensing |
| Battery Life | 2 years (typical) |
Provides general information about the manual and its importance for using Homematic IP components.
Details essential safety precautions, warnings about device modification, and operational environment requirements.
Specifies that the device must be operated in a dry, dust-free environment, protected from moisture and extreme temperatures.
Identifies the physical parts of the thermostat and explains the meaning of various display symbols.
Explains how the device integrates into the Homematic IP smart home system and available control methods.
Covers essential installation instructions, required electro-technical knowledge, and safety rules.
Provides detailed instructions for the physical installation of the wall thermostat into the flush-mounting box.
Guides on integrating the thermostat into the system via Access Point or directly with a floor heating actuator.
Details on setting automatic, manual, and holiday modes for personalized comfort.
Instructions for creating custom heating and cooling schedules with specific temperature settings for different times.
Setting the current date and time, and adjusting temperature offset for accurate room readings.
Configuring display options and parameters for connected floor heating actuators.
How to interact with the thermostat, activate it, and manually adjust the temperature.
Addresses command confirmation failures, duty cycle limits, and interprets error codes/flashing sequences.
Procedures for restoring factory settings and guidelines for cleaning and maintaining the thermostat.
Information on radio transmission, interference, and the device's EU declaration of conformity.
Detailed technical data, operational parameters, disposal instructions, and conformity information.
To Next Page
